CAEN
Electronic Instrumentation
UM6508
–
DT5495 User Manual rev. 0
29
d.
Click on ”Internet Protocol Version (TPC/IPv4)”, and select ”Proper
tie
s”
(
Fig. 8.9
).
Fig. 8.9:
Ethernet Properti
es window”
e.
Copy the configuration as in
Fig. 8.10
on the ”Internet Protocol Version (TPC/IPv4) Proper
ti
es” window
.
Fig. 8.10:
Properties window o
f the ”Internet Protocol Version (TPC/IPv4)”
Note:
Considering the factory default IP address of Hexagon is 192.168.0.90, use for the Network settings of the PC the
same first three IP Address numbers of the Hexagon IP, while make sure to set the fourth decimal number to a value
different from the Hexagon one to avoid IP conflicts over the net.
It is finally possible to connect to Hexagon by the Web Interface described in the next section (Sec.
Web Interface
).
