Cadillac 2006 CTS, Руководство пользователя

Страница: 89 / 136

FM2: This command instructs the system to change the
audio source to FM2.
XM1: This command instructs the system to change the
audio source to XM1.
XM2: This command instructs the system to change the
audio source to XM2.
RDS Message On, RDS Display Message On: This
command instructs the system to turn on the RDS
Message feature.
RDS Message Off, RDS Display Message Off: This
command instructs the system to turn off the RDS
Message feature.
RDS Traffic On: This command instructs the system to
turn on the RDS traffic feature.
RDS Traffic Off: This command instructs the system to
turn off the RDS traffic feature.
RDS Alternate Frequency On: This command instructs
the system to turn on the RDS alternate frequency
feature.
RDS Alternate Frequency Off: This command instructs
the system to turn off the RDS alternate frequency
feature.
Radio Tune: This command instructs the system to
change the current radio station by saying the command
and then the frequency of the radio station. For example,
if you say “radio tune ninety four point seven,” the station
will switch to 94.7 FM. If you are changing the station for
the AM band, say “radio tune ten seventy” for
1070 instead of “one zero seven zero.” If the station
frequency has two or three zeros, such as 600 or
1000 AM, say “radio tune six hundred” or “radio tune
one thousand.” The exception is a station frequency that
includes a zero between other numbers. In this case, say
“oh” instead of zero as in “radio tune one oh seven point
nine” for frequency 107.9 FM. This feature does not work
with XM™.
Seek Up, Seek Down: These commands instruct the
system to seek up or down to the next or previous
station and stay there.
Scan Up, Scan Down: These commands instruct the
system to preview stations either forward or backward.
To stop this feature, say “Scan” again.
Preset X: This command instructs the system to
change the current radio station to one of the preset
stations on the active audio source.
To use this command, you must know the number of the
preset you wish to hear. For example, if you want to hear
the station saved to preset three, say “preset three.”
4-5