Cabletron Systems MMAC-Plus SFCS-1000, Руководство по настройке

Страница: 80 / 404

3-8
Configuring an Emulated LAN
3.4 Configuring an ELAN
To configure an ELAN on a switch, you must log into AMI on a switch run-
ning software version 4.0 and use the commands found under
configuration
lane .
NOTE:
More information about each of these
commands may be found in Appendix B of
this manual.
There are three major steps that the system administrator should follow in
order to configure and maintain ELANs:
1. Configure an LECS configuration database file.
2. Start the LAN Emulation Services (LECS, LES, and BUS).
3. Start the LEC(s) and join an ELAN.
NOTE:
Steps 1 may be performed using a text editor
on any system. However, for software version
4.0, the resulting file can be used only on
systems running under SunOS Version 4.1.x
or on a switch.
The remainder of this section gives a practical example of configuring and
administering an ELAN using software version 4.0.