Cabletron Systems MMAC-Plus SFCS-1000, Руководство по настройке

Страница: 49 / 404

1-27
Configuring PVCs
1.7.4 AMI UPC Commands
AMI allows the user to create a UPC contract using these combinations of
traffic parameters. To create a UPC contract, log into AMI and enter the fol-
lowing parameters:
localhost::configuration upc>
new <index> [<UPC>] [-cdvt <us>] [aal5epd] [-name <name>]
Where UPC is one of the following combinations of traffic parameters:
ubr
cbr <pcr01>
cbr0 <pcr0> <pcr01> [tag]
vbr <pcr01> <scr01> <mbs01>
vbr0 <pcr01> <scr0> <mbs0> [tag]
The <index> parameter is an arbitrary, user-assigned integer that represents
this particular contract. This number will be entered as a parameter when cre-
ating a VPC, VCC, or SPANS signalling path that you want this contract to
assess.
NOTE:
Remember, when you create this UPC con-
tract, it is not actually used until you assign it
to a VPC, VCC, or SPANS path.
The [<UPC>] parameter is one of the five combinations of traffic parameters
outlined in Section 1.7.3.
The [-cdvt <us>] parameter is an optional CDVT rate assigned by the user
and specified in microseconds.
The [aal5epd] parameter is also optional. If entered, Early Packet Discard
(EPD) is enabled on this connection. If it is not entered, then EPD is not
enabled on this connection.
The [-name <name>] parameter is an optional, user-assigned name that
helps the user remember for what kind of connection this particular contract
should be used.
For example, to create a contract for VBR traffic in which the tagging option is
used, you would enter the following:
localhost::configuration upc>
new 1 vbr 1000 500 100 tag -name video-vbr