Cabletron Systems MMAC-Plus SFCS-1000, Руководство по настройке

Страница: 155 / 404

B-3
AMI Configuration Commands
Major alarm relay status Off means that no major alarms are currently active.
On means that one or more major alarms are cur-
rently active. Look at the AlarmStatus field to see
which condition is in a state of alarm.
Minor alarm relay status
Off
means that no minor alarms are currently active.
On
means that one or more minor alarms are cur-
rently active. Look at the AlarmStatus field to see
which condition is in a state of alarm.
B.1.2 Enabling an Alarm
This command lets the user enable an alarm. Enter the following parameters:
localhost::configuration alarms>
enable (major | minor) <alarm type>
major|minor Designates whether the alarm type causes a major
alarm or a minor alarm when that condition occurs.
alarm type Indicates the kind of alarm condition. Valid parame-
ters are displayed in the
AlarmType field when the
command string configuration alarms show is
entered at the prompt.
For example, to enable an overtemperature condition that is detected by the
overtemperature sensor as a major alarm, enter the following parameters:
localhost::configuration alarms>
enable major tempSensorOverTemp
To verify that the change has taken effect, you can display the alarms:
localhost::configuration alarms>
show
AlarmType AlarmStatus MinorAlarm MajorAlarm
powerSupplyInputFailed inactive disabled enabled
powerSupplyOutputFailed inactive disabled enabled
fanBankFailed inactive disabled enabled
tempSensorOverTemp inactive disabled enabled
linkFailed inactive enabled disabled
spansFailed inactive enabled disabled
Major alarm relay status: off
Minor alarm relay status: off