Cabletron Systems MMAC-Plus SFCS-1000, Руководство по настройке

Страница: 93 / 404

3-21
Configuring an Emulated LAN
3.4.4 Starting the LAN Emulation Services
LAN Emulation services include the LECS, LES, and BUS. Once the LECS
configuration database file has been configured, each of these services must
be started so that they are available for LECs to attempt to use. These services
may, but need not, run in the same machine.
3.4.4.1 Starting the LECS
Once an LECS configuration file has been configured, you need to retrieve the
LECS configuration database file that you built by using the following AMI
command:
configuration lane lecs get <host>:<remotefile> [<localfile>]
For example, you would enter something similar to the following:
configuration lane lecs get 198.29.22.46:lecs.cfg
NOTE:
The default local file for a 9A000, an
SFCS-200BX, an SFCS-200WG, and an
SFCS-1000 is
lecs.cfg .
NOTE:
On a 9A000, an SFCS-200BX, an SFCS-
200WG, and an SFCS-1000, this file is
retrieved via tftp.
After you have retrieved the LECS configuration database file, use the follow-
ing AMI command to start the LECS service on the switch:
configuration lane lecs new <LECS Selector byte (HEX)> [-db <LECS database file>]
[-default <LES atm address>]
For example, to start the LECS service using only the -db option, you would