Cabletron Systems MMAC-Plus SFCS-1000, Руководство по настройке

Страница: 268 / 404

B-116
AMI Configuration Commands
B.14.2.4 Turning Off or Turning On System Log Messages to the Console
On a 9A000, SFCS-200WG, an SFCS-200BX, and an SFCS-1000, the system log
messages may be directed to three places: to syslog, to the console, and to a
remote host. These types of switches are defaulted to send log messages to
both the console and to syslog. The
console
command can be used in differ-
ent ways.
To display whether or not log messages are being output to the console, enter
console without any arguments as follows:
localhost::configuration system syslog>
console
If the messages are being sent to the console, the following message is shown:
Syslog console output is currently ON.
If the messages are not being directed to the console, the following message is
displayed:
Syslog console output is currently OFF.
To enable log messages to be sent to the console, or to stop log messages from
being output to the console, enter
console with the appropriate argument as
follows:
localhost::configuration system syslog>
console [enable|disable]
enable Indicates that all log messages will be written to the
console.
disable Indicates that no log messages will be written to the
console.