KBU 64
User Manual
80-10100000-09
4–42
will remove the channel MSN number.
Typing:
1> NUMBER
[CR]
will display the MSN number which has been set.
An incoming call on a line configured for MSN will be routed to that
particular channel if it matches the MSN on that channel.
If MSN is not set on either channel, then the call will be accepted by
either channel, depending which ‘B’ channel is used.
If MSN is set on both channels and the incoming call does not match
either, the call will be cleared and an ‘Incompatible Destination’ message
sent back to the caller. This message can also occur if more than one
digit is specified but only one digit is provided by the network.
4.22 USA Variant 7 Parameters
The following parameters are only available with Variant 7 for use in the
USA (see section
2.5.1
for Variant selections).
4.22.1 Service Profile ID (SPID)
The American National (NI-1) ISDN (or Belcore standard) requires that
the KBU 64 handles Service Profile Identification (SPID). The SPID
uniquely identifies a particular set of subscription parameters assigned to
the ISDN subscriber’s Terminal Service Profile.
The SPID is a unique terminal number that can be recognised by the
network provider. The SPID number that must be entered is from one to
20 digits, the last two digits must be in the range of 01 to 62.
Please check with your network provider for the SPID number that you
require to enter.
To enter the SPID, type:
1> SET SPID XXXXXXXXXXXXXXXXXXXX
[CR]
where
XXXXXXXXXXXXXXXXXXXX
is from 1 to 20 digits.
To display the SPID that has been set, type:
Содержание KBU 64
Страница 30: ...KBU 64 User Manual 80 10100000 09 3 2 Figure 3 1 The KBU 64 Front and Rear Panels...
Страница 123: ...KBU 64 User Manual 80 10100000 09 12 2 Figure 12 1 Position of PCB link options...
Страница 126: ...KBU 64 User Manual 80 10100000 09 14 2...
Страница 127: ...KBU 64 Command Map 80 10100000 09 14 3...
