Cabletron Systems KBU 64, Руководство пользователя

Страница: 99 / 127

Manual Backup Commands
80-10100000-09 6–3
NOTE: If the remote KBU 64 that you are calling has ANSWER set to
CLID, it will reject your call, unless your telephone number is one of
those held in the remote KBU’s CLID directory.
Alternatively, a telephone number held within a specified STORE
directory location can be used as the number to dial. For example,
typing:
1> DIAL Nn
[CR]
where
n
is the STORE directory location of the required telephone
number.
As a further alternative, any telephone number can be used in
conjunction with the DIAL command, by fully specifying the number on
the dial command line:
1> DIAL 07931234567
[CR] or
1> DIAL 07931234567/PORT1
[CR]
if a sub-address is used
Note: If a call is initiated using one of the STORE directory locations,
and the directory is emptied during a call attempt (the user erases all of
the numbers after initiating a call) then the dialling attempt will be
aborted.
On outgoing calls, if the call is not answered after the set ANSWER
delay, plus 30 seconds, the call will be rejected.
6.4 Answering an Incoming ISDN Call
You will be informed on the terminal screen of any incoming call on the
ISDN, which you can accept using the ANSWER command.
1> ANSWER
[CR]
Answering an incoming call on the ISDN does not route the data path
away from the Kilostream line. It is only used to initiate the ISDN link.
This command is normally used with the parameter ANSWER set to
MANual.