KBU 64
User Manual
80-10100000-09
4–30
Alternate redialling is automatically initiated if BACKUP is set to AUTO.
Alternate redialling is also initiated automatically during manually
entered
BACKUP[CR]
or
DIAL[CR]
commands when specific numbers
or ranges of numbers have been defined in the command string. (see
section 6
for details on manually initiated calls).
The telephone number in STORE directory location 1 will be the first one
tried when your KBU 64 initiates a backup call. If this call is
unsuccessful, the number will be retried a specified number of times,
before the telephone number contained within directory location 2 is
tried, and so on.
Once all of the numbers within the directory have been tried, the
sequence will restart after a specified time period. This entire cycle will
be repeated a specified number of times.
You can define the following time delays and cycles:
re-try Individual numbers - 1 to 99
number of cycles for the complete sequence - 0 to 99
time delay before repeating complete directory dialling (1 cycle)
Alternate redialling can be stopped by manually issuing the
HANGUP
[CR]
command.
4.14.1 Defining the Number of Tries for each Telephone Number
The REDIAL command is used to define both the number of possible
cycles, and the number of tries for each number:
1> SET REDIAL n m
[CR]
where
n
is the number of possible cycles, ranging from 0
(continuous) to 999
m
is the number of times each telephone number will be
tried before moving on to the next. Specified in the
range from 1 (default) to 999.
Содержание KBU 64
Страница 30: ...KBU 64 User Manual 80 10100000 09 3 2 Figure 3 1 The KBU 64 Front and Rear Panels...
Страница 123: ...KBU 64 User Manual 80 10100000 09 12 2 Figure 12 1 Position of PCB link options...
Страница 126: ...KBU 64 User Manual 80 10100000 09 14 2...
Страница 127: ...KBU 64 Command Map 80 10100000 09 14 3...
