Cabletron Systems Expansion module 9H532-17, Руководство пользователя

Страница: 60 / 178

Local Management: Overview, Setup, and Navigation
44
Ethernet Interface Configuration Screen Fields
The following information briefly explains each Ethernet Interface Configuration
Screen field.
Intf (Read-Only)
This field displays the interface number.
Port (Read-Only)
This field displays the number of the physical port on the interface. For the front
panel ports on the 9X5XX-series modules, this will always be 1.
PortType (Read-Only)
This field displays the type of interface using the name of the Cabletron Systems
physical port type. For the Ethernet 10/100 ports in the 9H532-24, FE-100TX will
be displayed. If a Gigabit port is installed via the optional HSIM or VHSIM, the
interface displayed may be GE-1000SX or GE-1000LX.
Link (Read-Only)
This field indicates whether or not there is a physical connection from the port to
another device. One of the following values is displayed:
• Link – There is a link signal present and a valid physical connection to another
device.
• No Link – There is no link signal present and there is no valid physical
connection to another device.
Speed (Read-Only)
This field displays the current operational speed in Mbps. Display options are 10,
100 or 1000. If the port has not completed Auto-Negotiation, “NA” displays.
Duplex (Read-Only)
This field displays the current duplex setting. One of the following values is
displayed:
• Half – the port will operate in half duplex mode.
• Full – the port will operate in full duplex mode.
• NA – The port has not completed Auto-Negotiation.