Cabletron Systems Expansion module 9H532-17, Руководство пользователя

Страница: 176 / 178

Local Management: Overview, Setup, and Navigation
160
vrrpPort:
Description:
Enables the user to choose the Virtual Router Redundancy Protocol
(VRRP) Port(s), front panel Ethernet or Fast Ethernet ports.
When the link on a VRRP Port goes down or up, the database is
purged. Then a notification is sent out to all LAN emulation clients
(LECs) connected to the local HSIM/VHSIM to clear their LEARP
cache. Clearing the databases causes the removal of old
information and forces the 9X5XX-series devices to establish new
virtual connections based on the new router paths.
NOTE:
This command is valid only when an HSIM-A6DP or VHSIM-
A6DP is installed in the SmartSwitch device.
Syntax: vrrpPort [ get ]
vrrpPort [ set ] [ port# ]
vrrpPort [ unset] [ port# ]
vrrpPort [ set ] [all]
vrrpPort [ unset] [all]
Options: get – displays a list of all port numbers of VRRP Ports currently set.
set port# – sets a specific port as a VRRP Port.
set all
– sets all front panel as VRRP Ports.
unset port# – terminates the VRRP setting on a specific port.
unset all – terminates the VRRP setting on all front panel ports.
NOTE:
Setting the VRRP Port(s) to 0 will disable this application.
-> stpStandby status
Disabled.
-> stpStandby enable
-> stpStandby status
Enabled.
-> stpStandby disable
-> stpStandby status
Disabled.
->
stpStandby