Cabletron Systems Expansion module 9H532-17, Руководство пользователя

Страница: 98 / 178

Local Management: Overview, Setup, and Navigation
82
Changing the Forwarding Mode
To change the forwarding mode of the switch, proceed as follows:
1. Use the arrow keys to highlight the Forward Default VLAN Out All Ports
field.
2. Press the Space Bar or BACKSPACE to toggle between YES and NO. The YES
selection places the default VLAN (VLAN ID=1) in the Port VLAN Lists of all
ports on the switch. The NO selection removes the default VLAN from the
Port VLAN Lists of all ports, unless those ports have a PVID of 1 (those
belonging to only the Default VLAN).
3. Use the arrow keys to highlight the SAVE command at the bottom of the
screen.
4. Press ENTER. The message “SAVED OK” displays.
Paging Through the VLAN List
To display additional VLANs that do not display in the current VLAN List as
shown on the screen, use the NEXT or PREVIOUS commands located at the
bottom of the screen, as follows:
1. To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER to view the entries on the next screen.
2. To display the previous screen, use the arrow keys to highlight PREVIOUS.
Press ENTER to view the entries on the previous screen.
The NEXT and PREVIOUS fields will only display if there are further VLAN
List entries to page through.
NOTE