159
Local Management: Overview, Setup, and Navigation
Example:
telnet:
Syntax:
telnet [IP address] <Port #>
Description:
The telnet command allows the user to communicate with another
host (that supports Telnet connections) using the Telnet protocol.
The user must specify the remote host using its IP address. The [IP
address] field is mandatory. If no Port number is specified, telnet
will attempt to contact the host at the default port.
Options:
<Port #>
Example:
stpStandby:
Syntax:
stpStandby [enable/disable/status]
Description:
The stpStandby command allows the user to control the behavior
of the Spanning Tree during link state change. The user may
enable, disable or see the status of stpStandby. The enable
command will cause the STP to go through the standby states for
the port which received valid link. The disable command will
cause the STP to stay in the forwarding state regardless of the link
state change.
Options:
Not Applicable
Example
:
-> loopback_detect enable
-> loopback_detect disable
-> loopback_detect status
Loopback_detect is disabled.
-> telnet 134.141.12.345
Trying 100.200.300.400
Connected to 100.200.300.400
SunOS UNIX (server1)
login:
Содержание Expansion module 9H532-17
Страница 1: ...9033130 05 SmartSwitch 9000 9X5XX Series Local Management User s Guide ...
Страница 2: ......
Страница 16: ...Contents xiv ...
Страница 178: ...Local Management Overview Setup and Navigation 162 ...
