Cabletron Systems Expansion module 9H532-17, Руководство пользователя

Страница: 140 / 178

Local Management: Overview, Setup, and Navigation
124
9. To add the new port configuration to memory, highlight the ADD command
field and press ENTER. The new entry displays in the screen.
10. Repeat steps 1 through 9 of this procedure to configure a second entry on the
port. (Two inbound rate limiting entries can be configured per port.)
11. If rate limiting entries are to be configured on other ports on the device, repeat
steps 1 through 10 to configure each port.
12. After configuring the entry(ies) on the ports, enable the screen function for all
the configured ports by highlighting DISABLED in the Feature field and
pressing ENTER. The screen function is enabled and the Feature field changes
to ENABLED.
Changing/Deleting Port Line Items
All, or one or more, line items containing the configured port and its priority,
maximum rate, and associated dropped frames can be changed/replaced or
deleted as follows:
Changing One or More Line Items
To change the configuration values in a line item, that line item must be deleted
and replaced with a new entry with the correct configuration values. The new
settings can then be configured and added.
Deleting All Line Items
To delete all configured line items, use the arrow keys to highlight the DEL ALL
command field and press ENTER.
Deleting One or More Line Items
To delete one or more line items, mark each entry and then delete them, as
follows:
1. Use the arrow keys to highlight the line to be deleted.
2. Press the M key and an asterisk (*) appears next to the highlighted line to
mark it. The DEL ALL command is changed to DEL MARKED.
3. If more than one line item is to be deleted, repeat steps 1 and 2 to mark each
line.