Cabletron Systems Expansion module 9H532-17, Руководство пользователя

Страница: 48 / 178

Local Management: Overview, Setup, and Navigation
32
SNMP Traps Screen Fields
The following information briefly explains each SNMP Traps Screen field.
Chassis Trap Agent (Toggle)
This field enables/disables specific chassis traps to the network management
station. The field toggles between ENABLED and DISABLED. The default is
DISABLED.
Trap Destination (Modifiable)
This field indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
Trap Community Name (Modifiable)
This field displays the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
Enable Traps (Toggle)
This field enables transmission of the traps to the network management station
with the associated IP address. This field toggles between [YES] and [NO].
Configuring the Trap Table
To configure the Trap Table:
1. Use the arrow keys to highlight the appropriate Trap Destination field.
2. Enter the IP address of the workstation that is to receive traps. IP address
entries must follow the DDN format. For example: 000.000.000.000
3. Press ENTER. If an invalid entry is entered, the message “INVALID IP
ENTERED” displays in the Event Message Line.
4. Use the arrow keys to highlight the Trap Community Name field. Enter the
community name.
5. Press ENTER.
6. Use the arrow keys to highlight the Enable Traps field.
7. Press the Space Bar to choose either of the following:
• YES - Send alarms from the module to the workstation
• NO - Prevent alarms from being sent to the workstation
8. Use the arrow keys to highlight the SAVE command and press ENTER. The
message “SAVED OK” displays on the screen.