Cabletron Systems Expansion module 9H532-17, Руководство пользователя

Страница: 138 / 178

Local Management: Overview, Setup, and Navigation
122
The Port Number field may be highlighted and toggled to Port Type using the
Space Bar.
When the Port Number field is displayed (default value), the Port field below
may be highlighted and a port number entered in that field.
When Port Type is displayed, the field below may be highlighted and a port type:
[all 10Mbps enet], [all 100Mbps enet] or [all 1Gbps enet] may be selected using the
Space Bar.
Priority List (Selectable) – bottom of screen
Assign one or more priorities to the port being configured. The settings available
are 0, 1, 2, 3, 4, 5, 6, 7, or ALL. When the Priority List is highlighted, the Space Bar
is used to step to the priority, which can be marked with an asterisk (*) using the
M key. More than one priority may be selected and marked for each port.
The selected priorities can be cleared by stepping to each one and pressing the
M key.
Direction (Toggle) – bottom of screen
Toggles between Inbound or Outbound. Determines if inbound or outbound
packets are being regulated.
Max Rate: Kbps (Modifiable) – bottom of screen
Enter the maximum transmission rate for this entry. The maximum transmission
rate includes all frames associated with the priorities selected in the Priority List
field. The minimum setting is 500 (500 Kbps).
ADD (Command)
Add the current port, priority, and maximum rate selections to the screen.
DEL ALL/DEL MARKED (Toggle)
Delete all or one or more marked entries. The DEL ALL command is the default
and it is used to simultaneously delete all the lines of configured information. The
DEL MARKED command appears in place of the DEL ALL command when one
or more lines are marked for deletion.
If there are two entries with the same Port number (for example, Port 2 and Port
2), you cannot assign the same priority to both port entries.
NOTE