Cabletron Systems Expansion module 9H532-17, Руководство пользователя

Страница: 23 / 178

7
Local Management: Overview, Setup, and Navigation
Table 3 describes the most common event messages. Event messages related to
specific Local Management applications are described with those applications
throughout this manual.
Heading
The heading will indicate the module name, the same as listed next to Module
Type.
Module Type and Slot Number
These fields display only when a module is being accessed through Local
Management. The module type is displayed and the chassis slot number of the
module is displayed. A chassis screen will not display these fields.
Display Fields
Display fields cannot be edited. These fields may display information that never
changes, or information that may change as a result of Local Management
operations, user selections, or network monitoring information. In the screens
shown in this guide, the characters in the display fields are in plain type (not
bold). In the field description, the field is identified as being “read-only”.
Input Fields
Input Fields require the entry of keyboard characters. IP addresses, subnet mask,
default gateway and device time are examples of input fields. In the screens
shown in this guide, the characters in the input fields are in bold type. In the field
description, the field is identified as being “modifiable”.
Selection Fields
Selection fields provide a series of possible values. Only applicable values appear
in a selection field. In the screens shown in this guide, the selections display
within brackets and are in bold type. In the field description, the field is identified
as being either “selectable” when there are more than two possible values, or
“toggle” when there are only two possible values.
Table 3. Event Messages
Message What It Means
SAVED OK One or more fields were modified, and saved to
NVRAM.
NOT SAVED?--PRESS SAVE
TO KEEP CHANGES Attempting to exit the LM Screen after one or more
fields were modified, but not saved to NVRAM.
NOTHING TO SAVE The SAVE command was executed, but no changes
were made that required saving.