General Configuration
QuickSET Configuration Guide
107
Interface Backup Setup Button
The Interface Backup Setup button displays the Interface Backup Configuration Window shown
in
Figure 117
below. The Interface Backup Configuration Window lets you set up the parameters
for a backup WPIM interface (usually an ISDN interface).
Figure 117 Interface Backup Configuration Window
The connection parameters of the highlighted interface are displayed in the center of this window.
You can scroll down the list of interfaces using the scroll button at the right of the data field, and
display the connection parameters of the highlighted interface. Click on the Modify button to
display the Modify Backup Configuration window shown on the following page in
Figure 118
.
The Modify Backup Configuration Window shows the parameters for the backup interface (the
interface/backup combination highlighted in the Interface Backup Configuration window).
Click OK when you have finished modifying the backup entry.
Click Done when you have finished with the backup table.
