Configuration with QuickSET
110
QuickSET Configuration Guide
Spoofing Settings Button
Spoofing is a cost saving innovation. Spoofing uses a router on the LAN to simulate “keep-alive”
packets sent across a WAN link to keep the connection open. Generating these packets locally lets
the connection close down, saving the cost of keeping a circuit alive when there is no traffic.
Clicking the Spoofing Settings button displays the Spoofing Settings Window shown below in
Figure 120
. This window lets you set up spoofing for individual packet types for each interface
number. Clicking the Modify Button displays the Modify Spoofing window shown below
in
Figure 121
.
Figure 120 Spoofing Settings Window
Figure 121 Modify Spoofing window
