Routing Configuration Window
QuickSET Configuration Guide
137
Figure 149 Add IP Host and Modify IP Host Windows
The IP Host Map is a database of remote IP hosts, defined (generally) by their IP Address, and
(more specifically) by their Interface Number and Data Link Connection Identifier (DLCI). The
DLCI and Interface Number define the switched connection to the Telco central office.
Use the Interface Number scroll button to select an Interface Number. Enter the DLCI (Data Link
Connection Identifier) number in the DLCI window. The DLCI number is the identifier for the
virtual circuit present on the interface. On an interface configured for Frame Relay, this number is
the DLCI for the IP Address at the end of the circuit. Enter the IP Address of the host in the IP
Address window. The Add IP Host window (
Figure 149
, above), appears when you click on the
Add button to add an IP Host Map to the table.
Modify IP Host Window
The Modify IP Host window (shown in
Figure 149
, above) appears when you click on the Modify
button in the IP Host Map window. The host data displayed will correspond to the Interface
Number displayed in the IP Host Map window. When you have finished modifying the data, click
the OK button to enter the new data into the database. The database will be saved when you click
the Save button and then exit QuickSET.
