Ethernet Configuration
QuickSET Configuration Guide
3
Enter the IP address of the QuickSET-configurable device in the appropriate field and the
password if applicable (the default password is
public
). Click on the
Create a Route...
checkbox
to create a route to this device on your PC. Click on the
OK
button and
QuickSET
locates the
device on the network and displays the First Introductory window.
Click on the
Next>>
button and go to the Ethernet 1 and 2 Configuration window (shown on the
following page) in
Figure 4
, (or for HSIM-W6 and HSIM W-84, the Local HSIM IP Address
Window, shown in
Figure 5
) to continue the configuration.
Ethernet Configuration
This section explains how to configure the Ethernet 1 and 2 fields using
QuickSET
.
Note: there will be only one local Ethernet configuration window for the CSX200 and CSX500
devices.
Ethernet 1 and 2 Configuration Window
The Ethernet 1 and 2 configuration window, shown in
Figure 4
on the following page, displays
after clicking on the
Next>>
button in the Introductory window. The Local Ethernet IP address and
Subnet Mask fields shown on the Ethernet 1 and 2 configuration window are used for setting an IP
address and Subnet Mask. This section describes each of the fields on the Ethernet 1 and 2
configuration window.
