manualshive.com logo in svg

Cabletron Systems CSX100 series, Руководство пользователя, Страница: 84 / 153

Поделиться
Скачать
Cabletron Systems CSX100 series Скачать руководство пользователя страница 84

ISDN Router

70

DHCP Settings

The router is preconfigured with a preset IP address pool and a gateway
(192.168.254.254).  Before becoming active, the router’s DHCP server
attempts to locate other active DHCP servers on the network such as
Windows NT servers. If one is detected, the router’s DHCP server
disables itself.

This picture shows a DHCP sample configuration.

The DHCP Server Settings screen allows users to:

•

 

Change the IP Address Pool if needed

•

 

Configure DNS information specifically for Internet access

•

 

Configure the WINS Servers settings if working with Windows NT

⇒

 

To access the 

DHCP Server Settings

 screen, click 

System Settings

and 

DHCP Settings

.

 

DHCP IP Address Pool

 

The existing IP Address Pool settings can be changed if you need to

 

modify/increase the range of your address pool.

 

If you change your router’s IP address, the router’s DHCP server will

 

automatically provide a new IP address pool for the new subnet if the

 

preceding subnet was enabled.

 

DNS Configuration

If you intend to primarily configure your router for Internet access, you
need to enter DNS information provided by your Internet Service
Provider.

Содержание CSX100 series


























































































































































Отзывы:

Нет отзывов