manualshive.com logo in svg

Cabletron Systems CSX100 series, Руководство пользователя, Страница: 113 / 153

Поделиться
Скачать
Cabletron Systems CSX100 series Скачать руководство пользователя страница 113

                       

Router Feature Descriptions 

99

The following MIBs are supported:

·

 

MIB II

·

 

Bridge MIB

·

 

Ethernet MIB

·

 

IP Forwarding MIB

·

 

PPP MIB For LCP

·

 

Enterprise MIB for configuration

Dynamic Host Configuration Protocol (DHCP)

DHCP is used to acquire IP addresses and options (such as the subnet mask,
DNS, gateway, etc.) automatically. On the practical level, acquiring these
initialization parameters with DHCP translates into avoiding the more
involved router/PC process (reconfiguration of router and/or PC addresses to
be in the same network).

Network Address Translation (NAT)

NAT is an IP address conversion feature that translates a PC’s local (internal)
address into a temporary global (outside/Internet) IP address.

NAT is needed when a PC (or several PCs) on a Local Area Network wants to
connect to the outside Internet to get to a remote network: NAT swaps the
local IP address to a global IP address. Our version of NAT goes one step
further by allowing several PCs to share one single IP address to the Internet,
thus reducing connection costs. In effect, it allows a whole LAN to connect to
the Internet as a Single User.

Software Upgrades

Software upgrades can be performed remotely using the TFTP protocol for the
software download process.  The router’s file system is a DOS-compatible file
system and any file contained within the system may be retrieved or replaced
using the TFTP protocol.  Specifically, configuration files and operating

Содержание CSX100 series


























































































































































Отзывы:

Нет отзывов