Cabletron Systems CSX100 series Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 153

Cabletron Systems CSX100 series Скачать руководство пользователя страница 103

M

anagement Tools

89

⇒

When you click

OK

, the file named AUTOEXEC.OLD is copied

back to the router.

Upgrade/Restore Configuration files

A Backup

or Upgrade operation on the configuration files will include all

of the system configuration data, except ISDN or DHCP settings files.

Upgrade/Backup ISDN settings or DHCP files

Backing up or upgrading the target system ISDN settings file or DHCP
file will respectively involve only the target systems ISDN settings file or
only DHCP file. The files will be copied to the directory C:/CFGMGR by
default.

Reset defaults

This feature allows you to clear all of your configuration files
(ISDN.DAT, SYSTEM.CNF, DHCP.DAT) and to go back to the original
factory default settings.

⇒

Click

Reset Defaults

. A message will ask you if you want to clear

your configuration files.

⇒

If you answer

Yes

, the router will reboot.

Note:

It is recommended that you back up all of your existing

configuration files before resetting the defaults in your router.

Reboot from Network

Reboot from Network

is used in the following situations:

•

To perform Beta testing (e.g., testing new router software before
downloading to FLASH memory)

•

To allow several routers to reboot from the same file on a server

Rebooting from the network will upload the file you have specified into the
router and execute it.

Note 1:

KERNEL.100 is the default file and is installed under the default

directory C:\CFGMGR or wherever you may have installed Configuration
Manager.

«
...
101
102
103
104
105
...
»

Содержание CSX100 series


























































































































































Отзывы:

Нет отзывов