Cabletron Systems CSX100 series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 153

Cabletron Systems CSX100 series Скачать руководство пользователя страница 3

ISDN Router

iii

First Edition (September 1998)

Published by:

C a b l e t r o n S y s t e m s
35 Industrial Way
Rochester, NH 03867
U.S.A.

Internet Web Site: http://www.cabletron.com

C O P Y R I G H T

Cabletron Systems provides this publication “as is” without warranty of any
kind, either expressed or implied, including, but not limited to, the implied
warranties of merchantability or fitness for a particular purpose.

All rights reserved. No part of this book may be reproduced in any form or by
any means without written permission from Cabletron Systems.

Changes are periodically made to the information in this book. They will be
incorporated in subsequent editions. Cabletron Systems may make
improvements and/or changes in the product described in this publication at
any time. Requests for further information should be addressed to Cabletron
Systems.

© Copyright 1997-1998 Cabletron Systems, Inc.
© Copyright 1997-1998 FlowPoint Corporation

T R A D E M A R K S

Cabletron Systems is a trademark of Cabletron Systems, Inc.
All other trademarks and registered trademarks mentioned in this guide are
the sole property of their respective companies and should be noted as such.

P/N 222-00499-01

«
1
2
3
4
5
...
»

Содержание CSX100 series


























































































































































Отзывы:

Нет отзывов