Cabletron Systems CSX100 series Скачать руководство пользователя страница 114 | Manualshive

Страница: 114 / 153

Cabletron Systems CSX100 series Скачать руководство пользователя страница 114

ISDN Router

100

system upgrades can be updated. Chapter 6,

Management Tools,

describes

how to upgrade software, boot the router from the network, make copies of
configuration files, and perform other maintenance procedures. A TFTP
server is provided with the software.

TELNET

TELNET access to the router is supported. TELNET allows you to log into
the router as if directly connected through the console port. In this manner
you can issue commands, using the Command Line Interface, to configure the
router and perform status monitoring from any remote location. Any of the
available TCP/IP packages containing the TELNET application can be
utilized. Refer to the

Command Line Interface

for more information.

A special feature,

History Log

, described on page 110, allows the redirection

of all console output (including notifications that would only appear at the
console terminal) to any TELNET session.

Windows GUI Configurator

A Microsoft® Windows™-based program, Configuration Manager, is
provided for configuring the router. This Windows GUI point-and-click
configurator is described in the chapter

Installing and Accessing

Configuration Manager.

A Winsock-compliant TCP/IP stack must be

installed on your PC to run Configuration Manager.

Command Line Interface

Configuration is also supported through the Command Line Interface. This
interface provides the ability to configure the same basic features as the
Windows GUI configurator, but through the console port or Telnet. It also
gives you the following capabilities:

•

PPP Call Back

•

Online status commands and error message monitoring

•

Statistics

•

Unique PAP or CHAP authentication or system name passwords

«
...
112
113
114
115
116
...
»

Содержание CSX100 series


























































































































































Отзывы:

Нет отзывов