Cabletron Systems CSX100 series, Руководство пользователя, Страница: 72 / 153

ISDN Router 58
Step 7. Reboot the Router and PC
After storing the configuration, you will be asked if you wish to reboot the
router.
⇒
Click Yes to confirm. A message window will inform you that router
rebooting is occurring.
⇒
Click Exit to leave Configuration Manager.
If you are using IPX routing, bridging, or DHCP, you may need to also reboot
PC clients so they can locate the new network segment or settings.
Step 8. Verify the Router Configuration
Before you proceed with testing your router configuration, verify your ISDN
settings as follows:
⇒
In Port Monitor , are the two channels in “ standby”?
⇒
If you have a POTS router, do you hear a dial tone when picking up the
phone handset?
Test IP Routing
Test IP Routing over the Local Ethernet LAN
Use the TCP/IP
ping
command or similar method to contact the
configured target router specifying the Ethernet LAN IP address.
If you cannot contact the router:
•
Verify that the IP address and subnet mask are correct
•
Check cable connections and pinning
Test IP Routing to a Remote Destination
You can verify IP connectivity to the remote by running a ping command
from a local LAN-connected PC. You will probably find a ping utility
bundled with your TCP/IP stack. In Windows 95 and Microsoft's TCP/IP
32-bit stack for Windows for Workgroups, the command is called
PING.EXE and can be found in your Windows directory.
Note: Before using the ping command to troubleshoot, make sure that
the PWR, LINE, and NT1 lights are green.