Cabletron Systems CSX100 series Скачать руководство пользователя страница 121

Страница: 121 / 153

Troubleshooting

107

If TCP/IP routing

•

Check that TCP/IP Routing has been set on and is enabled at the
remote end.

•

Check that the IP address of the LAN beyond the remote router is
correct, as well as the associated subnet mask.

•

If the remote router WAN IP address and subnet mask are required,
check that they have been specified correctly.

•

Check that, if required, the source and remote WAN IP addresses are
on the subnetwork.

•

Check that you have seeded the routing table with a route or a
default route, if RIP is not allowed to flow on the WAN link.

•

Be sure to reboot if you have made any IP address, control or
protocol option changes.

If IPX routing

•

Check that IPX Routing has been set on and the remote end is
enabled for IPX routing.

•

Validate that the IPX WAN network number matches the remote
router’s WAN network number.

•

Check that the IPX Routes (network numbers, hops, and ticks)
seeded into the routing table for network segments and servers
beyond the remote router are correct.

•

Check that IPX SAPs correctly identify the servers and applications
on the remote network and have valid network numbers, node
numbers, etc.

Problems dialing

Remote router won’t dial

•

Verify that it has a default IP route or a default bridge.

•

Check that the remote router is not disabled or in Dial-Back only and
has a phone number.

•

It may not be in standby due to ISDN problems.

•

Verify if it is in standby mode.

Содержание CSX100 series


























































































































































Результаты поиска

Содержание CSX100 series

Отзывы:

Cabletron Systems CSX100 series, Руководство пользователя, Страница: 121 / 153

Результаты поиска

Содержание CSX100 series

Отзывы: