15
6
Installation
6.1
Factory default Settings
i
Note!
The applicator is set up in a standard configuration by the factory. These values guarantee a smooth
operation.
i
Note!
In the case of a customer specific setup with special material the settings can deviate from the standard
values.
In this case the standard values in the setup protocol are as follows.
The factory default settings are:
•
Connected to a cab printer, vertical
•
Used Pad:
cab part No.: 5963881 54x36 for L
cab part No.: 5963878 54x36 for R
•
Material used for factory default settings:
cab part No.: 5556472 54x35.5
•
Pressure value of the compressed air:
0.45 MPa (4.5 bar)
Содержание 4114 Series
