C.Plath NAVIGAT X MK 1 Mod. 10, Руководство оператора

Страница: 25 / 82

Page 3-03
NAVIGAT X MK 1 Mod. 10 / SR-180 MK 1 Mod. 10
056310
3-149 MK110ENG.P65
3.2 Service Setup 2
The "Service Setup 2" menu provides access to operational data that may be of
importance when service or maintenance work is carried out. Additionally, the opera-
tor may initiate a masterboard reset.
3.2.1 Access Code
In order to prevent inadvertent or unauthorized changes of the configuration settings,
the service setup modes are protected by acces codes.
To access the Service-Setup 2, enter 610.
3.2.2 Gyrosphere Data
Function: Displays the gyrosphere temperature, phase bridge voltage and
gyrosphere current.
Note: Directly after power-up, the gyrosphere current should not exceed
550 mA. The current will gradually fall while the gyrosphere settles.
Within 45 minutes after power-up, the gyrosphere current must have
dropped below 300 mA. Failing this, the gyrosphere is defective and
must be replaced.
3.2.3 Op. Time counter
Function: Displays the operation time counter.
3.2.4 Data List
Function: Displays a list of operational data.
3.2.5 Error List
Function: Displays a list of currently detected errors. When the cause of a given
error is eliminated, the corresponding entry is automatically cleared
from the error list.
Note: Confirming an alarm state or muting the alarm buzzer does not clear
the corresponding entry from the error list.
3.2.6 Masterboard Reset (reset Mk 1)
Function: Initiates a reset (warm start) of the masterboard.