manualshive.com logo in svg

C.Plath NAVIGAT X MK 1 Mod. 10, Руководство оператора

Поделиться
Скачать
C.Plath NAVIGAT X MK 1 Mod. 10 Скачать руководство пользователя страница 49

Page 5-05

NAVIGAT X MK 1 Mod. 10 / SR-180 MK 1 Mod. 10

056310

3-149 MK110ENG.P65

5.3.3

Installation of the Gyrosphere

Note:

At the place of installation, a clean and level work surface must be available.

In addition to the parts provided in the installation and replacement parts kit,
a 5 mm hexagon key, a medium-sized and a small screwdirver will be needed
during the installation.

For cleaning purposes, a lint-free cloth and alcohol are required.

Caution:

 Do not use acetone or similar solvents.

1)

De-energize the gyrocompass system.

2)

Remove the gyrosphere container from its
transport box and place it on the work sur-
face.

3)

Unscrew the centering pin and place it
aside (do not yet remove the protective
cap from the pin).

4)

Disconnect and remove the plug connec-
tor from the base contact.

Содержание NAVIGAT X MK 1 Mod. 10



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды