C.Plath NAVIGAT X MK 1 Mod. 10, Руководство оператора

Страница: 52 / 82

Page 5-08
NAVIGAT X MK 1 Mod. 10 / SR-180 MK 1 Mod. 10
056310
3-149 MK110ENG.P65
16) Carefully fill up the recess of the
gyrosphere with supporting fluid.
17) Rinse the inside of the lower section of
the gyrosphere container with supporting
fluid.
18) Check that the drain plug is tightened
firmly. Pour some supporting fluid into the
gyrosphere container until the base con-
tact is covered by the fluid.
19) Check that the quad ring lies correctly in
its groove in the lower section of the
gyrosphere container.
Caution:
When replacing a gyrosphere, always use
a new quad ring.
20) Carefully remove the gyrosphere from the
plastic bowl and place it into the container.
21) Rinse the inside of the upper section of
the gyrosphere container with suppurting
fluid.
22) Carefully fit the upper par t of the
gyrosphere container to the lower part.
The golden contact pins fit into grooves in
the lower part of the container.