BYOU BEAUTY, Инструкции и рекомендации по установке и использованию

Страница: 5 / 28

5
Preliminary checks
It is indispensable to carry out several checks before starting
installation:
• Try and open the gate manually, the leaves must move
without effort and without points of resistance for the entire
run.
• When left in any intermediate position the leaf must not
move.
• The hinges and components subject to wear must be in
perfect working condition. If this is not the case, replace
the faulty parts.
• The door structure must be strong and the leaves rigid.
• With the gate completely closed, check that the leaves are
aligned perfectly along their entire length.
• The electric set-ups necessary for installation are highlighted
in the “Electric connections” paragraph. If they are not pre-
existing they must be realised, with the aid of a specialised
technician, if necessary (electrician).
• The pillars supporting the leaves must be suitable for fixing
the gear motors.
• Beauty has adjustable mechanical stops both in
opening and closing. However, a stop for closure on
the ground is recommended (Fig.2-ref.A).
The reliability and safety of the automation depend
on the state of the gate structure.
Check that there is enough space for installation of the
operator in safe and comfortable conditions.
Technical Data, dimensions and limits of use
TECHNICAL DATA
BEAUTY
Control unit power supply 230 Vac
Motor power supply 24Vdc
Absorbed power
80 W
Maximum current absorbed 3,5 A
Maximum thrust 1500 N
Maximum frequency of use
(complete opening/closure cycles) 15 cycles/hour
80 cycles/day
Protection rating IP44
Functioning temperature -20°C / +70°C
Opening time (90°)
12/18 s
Run 300 mm
Noise <70 dB
Weight 4,2 kg
LIMITS OF USE
Table 1 indicates the maximum values in the grey area (weight
by leaf length) acceptable for the BEAUTY automation
For example:
200 kg and 1.55 m leaf
It lies within the limits of use (black dotted line)
270 kg and 1.80 m leaf:
It DOES NOT lie within the limits of use (white dotted line)
2,0m 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2
DIMENSIONS
Fig.3 indicates the main overall dimensions.
The measurements are expressed in millimetres.
The 300 mm measurement represents the maximum run that
the rod can make during movement.
715
300
min 150
60
max 150
52
105
89
Fig.3
Check, with the leaf completely open, that there is suf-
ficient space for installation (Fig. 4).
Fig.4
Tab. 1
715
300
min 150
60
max 150
52
105
89