22
Remote controls quick duplication
If you have a transmitter that is already memorised, it can be duplicated without accessing the control unit for programming,
proceed as follows:
1
With remote control that is already memorised, give an opening command and wait for the leaf to
be in the completely open position.
PMOT
2
Press all three transmitter keys, already memorised, at the same time until the flashing light switches
on.
TX1
3
Press the button of the remote control that is already memorised that is to be copied into the new
transmitter. The flashing light switches off for 5 seconds.
PRG
TX1
4
When the flashing light switches back on, press the button of the new transmitter that is to assume
the function of the button selected in point 3.
PRG
TX2
5
If a new transmitter is to be duplicated, repeat the procedure from point 2.
Wait 60 seconds to exit the programming procedure.
Complete deletion of the receiver memory (RADI>RTR)
To delete the memory completely, eliminating all previously-inserted remote controls, proceed as follows:
1
Press the [PGM] button to access programming or if the control unit is already in the programming
menu, press [
5
] until the Radi menu is displayed.
PMOT
Radi
2
Press the [PGM] button to enter the Radi function.
The display shows the first sub-menu PP.
Press [
5
] three times to display the RTR sub-menu
rtr
3
Press the [PGM] button to enter the RTR function.
Press and hold [PGM], the RTR message starts to flash quickly.
4
When the RTR message switches off, release the [PGM] button, the display shows the PRG mes-
sage. All remote controls are now deleted from the memory.
PRG
6
To go back to the PP programming menu, press the [PGM] and [
5
] buttons at the same time.
Press the [PGM] and [
5
] buttons twice at the same time to go back to the main Radi menu.
To exit programming, remove the power supply or wait for 60 seconds.
PGM+
5
Deleting transmitters (RADI>CLR)
If you have a transmitter that is already memorised, it can be duplicated without accessing the control unit for programming,
proceed as follows:
1
Press the [PGM] button to access programming or if the control unit is already in the programming
menu, press [
5
] until the Radi menu is displayed.
PMOT
Radi
2
Press the [PGM] button to enter the Radi function.
The display shows the first sub-menu PP.
Press [
5
] twice to display the CLR sub-menu
Clr
3
Press the [PGM] button to enter the CLR function.
The display shows the flashing PUSH.
Push
4
Press any transmitter button BY that is to be deleted within 10 s.
PRG
5
The display shows OK to confirm cancellation.
OK
6
To go back to the PP programming menu, press the [PGM] and [
5
] buttons at the same time.
Press the [PGM] and [
5
] buttons twice at the same time to go back to the main Radi menu.
To exit programming, remove the power supply or wait for 60 seconds.
PGM+
5
Содержание BEAUTY
Страница 27: ......
