BYOU BEAUTY, Инструкции и рекомендации по установке и использованию

Страница: 14 / 28

14
Installation of selector K.BY
Description
Key selector with control of automations for automatic gates
and doors.
Wall fixing, customised key.
The customised key also has a burglar-resistance function as
it is indispensable for opening the selector.
Installation
Select the position of the selector in a way that it is in proximity
to the gate, at a height of about 80/100 cm.
To open the selector, remove the screw V, insert the key, turn
it in one of the two directions and hold it in this position, lift the
selector cover, which separates from the fixed base. Keep the
screw V, which is indispensable for closing the selector.
Two 6 mm plugs and relative screws are supplied for fixing the
selector base to the wall.
V
Using the support as a reference, mark and make two holes
with diameter of 6 mm in a way that the lower hole corresponds
to the set-up of the cables.
Insert the cable and fix the base to the wall using the plugs
and screws.
Connections
A terminal board is installed on the selector for the connection
to the Step-by-Step input (PP) of the control unit:
No polarity (+/-) has to be respected.
To close the selector, turn the key and hold it in this position,
insert the selector into the base fixed to the wall.
Release the key and fix the screw V.
TECHNICAL DATA F.BY selector
Contacts 1 micro switch, with spring
for return to central position
Functioning temperature
-20°C / +70°C
Protection rating IP44
Dimensions 72x90x46 (mm)
V