BYD F7-1, Руководство пользователя

Страница: 70 / 118

BYD F7-1, F7-2, F7-3
Owner’s Manual
Driving Tips 2- 2
Notice for running-in period
In the first 1,000km, pay special
attention to the driving mode to
ensure the reliable performance of the
car. Note the following in this period:
1. Avoid full throttle in starting and
driving.
2. Avoid emergency braking in the
first 300km.
3. Do not replace the engine oil
before reaching the time or
mileage recommended in the
regular maintenance table.
Also follow above notice after
overhaul, or replacing the engine or
friction plate.
Fuel
1. 483QB engine and 476ZQA
engine can use octane rating 93
or higher grade unleaded
gasoline.
2. Using leaded gasoline will
damage the emission control
device and engine of the car, and
also will aggravate air pollution.
3. Using low grade or low-quality
gasoline will reduce engine life.
4. For 476ZQA turbocharged engine,
it is recommended that use higher
quality fuel.
Adding fuel
Filler cap is located on the left side of
the car. Please keep this side near the
pump in the gas station.
1.
Press the handle outside of the
driver's seat to open the filler
cap.
2. Slowly remove the fuel filler cap.
Due to the release of pressure
within the tank, you may hear a
hiss. Filler cap is connected to
the refueling funnel with the
chain, to prevent losing the fuel
filler cap. For refueling, mount
the filler cap on the bracket of
the filler cap.
3.
When the refueling gun
automatically cuts off, stop
refueling. Do not fill the tank too
full, in order to leave space for
fuel expansion in case of
temperature change.
4. Screw the fuel filler cap back into
place and tighten until you hear
at least twice clicking sounds.
Filler cap
Clasp
Press down