BYD F7-1, Руководство пользователя

Страница: 43 / 118

BYD F7-1, F7-2, F7-3 Ow
ner’s Manual
Instrument and Controller Operation 1-33
II. Calibration step
Step 1: ignite to start
Step 2: select the starting
position, which may be any one of
north, south, west and east.
Step 3:
press and hold interior
rearview mirror key until the upper
right of the glass displays several
lines of description text (calibration
step description) and the anti-flare
indicator flashes three times quickly
(indicator illuminates and goes out
once) and then release the key.
Step 4:
drive one circle (360°) or
two circles at low speed (< 8km/h)
and return to starting position
(do
not flame out while driving; both
clockwise and counterclockwise are
allowed)
Step 5:
adjust the head to
“south”.
Press the key once (release
immediately),
the anti-flare indicator
flashes three times and the compass
points to
“South”
, and the calibration
finishes.
Step 6:
after calibration, drive the car
for one circle to check whether each
direction is proper. If not, re-calibrate
from step 1.
Sunroof
The sunroof has two positions: to
ensure ventilation, lift the rear side or
slide into the roof. The switch below the
air outlet of the instrument panel at
driver’s side can be used to control the
sunroof. However, the start button
must be in
“ON” position.
To lift the rear side of the sunroof,
press and hold ( ); to close the
sunroof, press and hold ( ) in
the top; to open the sunroof, press and
hold ( ) in the bottom.
N
E
W
S
Close sunroof
Open sunroof
Incline
sunroof