BYD F7-1, F7-2, F7-3
Owner’s Manual
Instrument and Controller Operation 1-
56
stop the car temporarily, use the
neutral position. No matter for what
reason, it is required to shift to park
position if you get off the car. In this
position, the shift lever will be locked.
Drive
(D)
— use this position during
normal driving. The transmission will
select appropriate position
automatically according to the car
speed and acceleration. In this
position, the car is in economic mode,
and consumes the least fuel.
Sport
(S)
— in sport mode, the
dynamics of the car is higher than in
economic mode.
Manual
(M)
— in manual mode, you
can push the shift lever to upshift (+)
position or downshift (-) position, so
as to control the gear position of
manual transmission.
Upshift
(+)
— during normal driving
and the shift lever is in manual mode,
push the shift lever to this position, the
transmission control unit (TCU) will
determine according to current car
speed, and the transmission position
will upshift accordingly until the top
position (six).
Downshift
(-)
— during normal
driving and the shift lever is in manual
mode, push the shift lever to this
position, the transmission control unit
(TCU) will determine according to
current car speed, and the
transmission position will downshift
accordingly until the bottom position
(one).
Selecting sport mode
When the shift lever is in D position,
push the lever to the left without
upshifting/downshifting, and the sport
mode is selected. The gear position
display of the combination instrument
displays D1, D2, D3, D4, D5, and D6.
Selecting manual mode
When the shift lever is in D position,
push the lever to the left, then push
the shift lever forward or backward,
the manual mode is selected, and the
gear position display of the
combination instrument displays M1,
M2, M3, M4, M5, and M6.
Note:
1. The shift lever is in the same
position in sport mode and manual
mode;
2. To shift from M position to S
position again, shift the lever to D
position first, and then shift to S
position.
3. In sport mode, the first
upshifting/downshifting operation is
the switching signal to enter manual
by default; the transmis
sion won’t
perform corresponding operation.
Starting the car
To start the engine, the shift lever
must be in park (P) or neutral (N)
position.
Stopping
To stop the car, please first release
the accelerator pedal and step on the
brake pedal, take up the hand brake
when the car stops completely and
finally shift the lever to P position.
Содержание F7-1
