BYD F7-1, Руководство пользователя

Страница: 57 / 118

BYD F7-1, F7-2, F7-3 Ow
ner’s Manual
Instrument and Controller Operation 1-47
(according to the clothing).
If the combination instrument has
image display or buzzer sounds, it is
possible that the sensor detects an
obstacle, or the outside interferes with
the sensor.
If this situation persists, contact BYD
authorized service station for repair.
Parking imaging system (optional)
The parking imaging system help the
driver park by displaying rear or right
front road condition in real time, which
is an auxiliary means of parking.
When the start button is set to
“ON”,
press the
“ ” key on the steering
wheel to start the right front imaging
mode; press
“ ” again to turn off
the right front imaging mode; when
the start button is set to
“ON”, turn the
shift lever to
“R” position to turn on the
reversing imaging mode; press the
“ ” key on the steering wheel to
switch between reversing imaging
mode and right front imaging mode.
The right front camera is installed on
the right rearview mirror; the reversing
camera is installed on the back door.
Parking operation
Enable parking imaging system when
the vehicle needs parking. If reversing
isn’t required, directly enable the right
front imaging mode. Through direct
observation of the surrounding
environment and the use of imaging
system, approach the car slowly to
the parking location.
While reversing, press the button
to switch between reversing imaging
and right front imaging to observe in
real-
time the places that can’t be seen
and help parking.
Right front camera mounted on the
right rearview mirrors
Reversing camera mounted on the
back door
Limitations of parking imaging
system
The camera's field of view is limited.
The objects close to both sides of the
bumper or below the
bumper can’t be
seen on the reversing imaging screen;
the objects in front, right center and
rear side of the bumper
can’t be seen
on the right front imaging. As shown
below: