BYD F7-1, F7-2, F7-3
Owner’s Manual
Instrument and Controller Operation 1-
22
end are fixed, and the seat belt
isn’t twisted.
4.
Push the child’s seat to different
directions and ensure that it is
fastened.
5.
Please follow the installation
instructions of the manufacturer
of the child protection device.
Fix the child’s seat on the anchor
properly
When use lower anchor, make sure
that there is no foreign matter
around the anchor device and the
seat belt
isn’t clamped behind the
child’s seat. Make sure that the
child protection device is fixed, or
else it may result in serious injury or
even death in case of emergency
stop or accident.
Seat belt
The driver should adjust the
shoulder height of three-point seat
belt to appropriate position
according to passenger’s body.
Length of the seat belt can be
automatically adjusted according to the
passenger figure and the seat position.
Keep the waist belt as low as the hip as
far as possible
—do not buckle it at your
waist. Then, tug the shoulder part
upward through the catch plate and
adjust the seat belt to an appropriate
position.
If the seat belt cannot smoothly retract
automatically, tug it out to see whether
there is any knot or twist; if yes, please
contact BYD sales and service station.
Seat belt with pretensioner
(optional)
The seat belts of driver’s seat and front
passenger’s seat, and will be activated
when serious frontal collision occurs.
When the sensor detects serious
frontal collision, the retractor will retract
the front passenger’s seat belt quickly,
so that the passenger will be protected
appropriately.
Even if there is no passenger on the
front pa
ssenger’s seat, the seat belt
pretensioner will be activated.
In case of collision, the pretensioner of
the front passenger’s seat belt and
SRS airbag may be not activated
simultaneously.
In case of collision, the seat belt
pretensioner will be activated, and may
cause noise and release non-toxic gas;
however, it does not indicate a fire and
the gas is usually harmless.
Emergency locking seat belt with
child protection module (rear
left/right seat belt)
To use this function, the ribbon should
be pulled out completely to activate this
device and enter self-locking activation
state. Then, the ribbon only can be
retracted in order to fix the child’s seat,
and the continuous click sound
accompanies to indicate that the
function is normal. After retracting for
certain distance (about 1.1m), the
sound disappears, this function is
inhibited and enters self-locking state,
and the ribbon can be pulled out and
retracted normally (
the child’s seat
Содержание F7-1
