BYD F7-1, Руководство пользователя

Страница: 109 / 118

BYD F7-1, F7-2, F7-3
Owner’s Manual
Self Maintenance 6- 3
If the coolant level in the expansion
tank is at or below the lower limit (MIN)
scale mark, you should add the
coolant to make the liquid level rise to
the upper limit (MAX) scale mark.
Check whether the cooling system
leaks.
Only use BYD approved coolant. Do
not add any extender. Do not mix
coolants of different brands and
models.
Warning

The coolant may spurt and
result in severe burns if the
radiator cap is opened before
the engine is completely
cooled down.

Before opening the radiator
cap, make sure that the engine
and radiator have cooled down.
1. Confirm that the engine and
radiator have cooled down;
2. Rotate the radiator cover
counterclockwise (do not press
down) until tightened. In this way,
the residual pressure in the cooling
system will be released in full;
3. Press down, and rotate
counter-clockwise at the same time
to remove the radiator cap;
4. The coolant level should reach the
bottom of the neck of the injection
port. If inadequate, add BYD
approved coolant. Pour the coolant
slowly to prevent overflow. If
overflow occurs, immediately clear
all of the discharge, or else it will
damage the components inside the
cabin;
5. Put on the radiator cap, press
down and rotate to the final stop
position;
6. Fill coolant into the expansion tank,
to make the liquid level rise to the
upper limit (MAX) mark, and then put
on the cover of expansion tank.
Radiator cap
Add to this level
Expansion tank