BYD F7-1, Руководство пользователя

Страница: 61 / 118

BYD F7-1, F7-2, F7-3 Ow
ner’s Manual
Instrument and Controller Operation 1-51
module is installed on the tire valve of
the radial tire (vacuum tire), tire
pressure monitoring and control
module is installed in the
compartment, and the display part is
realized by the meter.
The standard pressure of front wheels
of F7 is 240Kpa (2.4Bar, 34.8Psi), and
the standard cold pressure of the rear
wheels is 230Kpa (2.3Bar 33.4Psi).
This system has the following
characteristics:
①
Humanized design,
human-machine interface;
display on meter LCD screen,
which is reliable, beautiful,
practical, and simple
②
Alarms of high tire pressure, low
tire pressure, and fast leaking
③
Display the pressure values of
the four tires
④
Monitor changes of tire pressure
value in real-time
II. Basic functions
1) Boot alarm
Tires are under low pressure state
when the power of the car is cut off;
when the power resumes, alarm low
pressure immediately to prompt to
inflate the tire before driving.
2) Low tire pressure alarm
When the tire pressure is lower than
75% of the standard tire pressure
(front tire pressure is lower than
180KPa/1.8Bar/26.1Psi, rear tire
pressure is lower than
172Kpa/1.72Bar/24.9Psi), and the
system is running, TPMS will send
low tire pressure alarm signal in 6
seconds, and indicate the location of
the low pressure tires.
After low pressure alarm, inflate the
tire to standard pressure; when the
tire pressure is greater than 90% of
the standard pressure, the low
pressure alarm cancels.
3) High tire pressure alarm
When the tire pressure higher than
130% of the standard tire pressure
(front tire pressure higher than
312Kpa/3.12Bar/45.3 Psi, and rear
tire pressure is higher than
299Kpa/2.99Bar/43.3Psi), and the
system is running, TPMS will send
high tire pressure alarm signal in 6
seconds, and indicate the location of
the high pressure tires.
After driving a long period of time, the
tire pressure slightly increases due to
the increase of the temperature (cars
generally not higher than 30Kpa); this
is a normal phenomenon and users
do not have to worry about the tire
situation.
If the car has started overpressure
Friendly Tips
When the system function is
enabled, and the speed is 0-50
km/h (kilometer/hour), the alarm
cancels.