3.4
Inverting the main display line
In order to read the main display line (the 4 figures) from either inside or outside of the spa, this line can
be inverted. Proceed as follows:
Press the UP and DOWN keys simultaneously, the display will be inverted with respect to the initial screen
setting.
3.5
The meaning of the indicator LEDs
Auto :
This LED is green while filtration is running in automatic mode. While manual mode is active the LED
is out. In auto mode, the two-speed pump runs as required to heat the spa water and ensure that the
minimum filtration time is met. The LED blinks if the water sensor does not detect water and "PRIMING"
is displayed on the LCD screen
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
Auto icon
Heating :
This LED lights up when the heater is active. The heater can only operate when the two-speed pump is
on. The LED turns red when the heater is operating at full power.
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
Heating icon
Stand-by :
This LED turns green when the spa regulation system is in a stand-by period programmed by the user.
"STAND-BY PRESS KEY" is displayed on the screen. Stand-by mode can be deactivated by pressing
any key on the touch control pad.
Stand-by will also be deactivated if the two-speed pump is activated less than 90 minutes before a stand-
by period, or if the blower or massage pumps are used less than 25 minutes before a stand-by period.
When stand-by mode is deactivated, the LED turns orange for the rest of the programmed stand-by period.
8
A
A
O
O
3
3
Z
ZZZ
8
8
8
8
8
Stand-by icon
Ozone :
This LED turns green while the ozone generator is running. The ozone generator is activated about 10
seconds after the two-speed pump starts and is deactivated at the same time as pump stops. Pressing
any key on the control pad will stop the ozone generator. The ozone generator will restart automatically
after 30 minutes.
8
A
A
O
O
3
3
Z
Z
Z
Z
8
8
8
8
8
Ozone icon
30/48
2020/10 - Indice de révision : D - Code : 38050
SPAS
SPAS
