•
Session timer
The session time is programmed on entering the spa, an sound signal sounds when the session time
has elapsed ;
•
Alarms
Similarly to an alarm clock, the SP 1200 controller allows you to programme up to 9 alarms per week ;
•
Stand-by periods
It is also possible to define weekly spa stand-by periods during which the spa is not usually in use.
Filtration and heating remain off throughout each stand-by period ;
•
Periodic maintenance
Reminders to carry out periodic maintenance can be programmed. Maintenance interventions 'due' are
signalled by the SP800.
2.
TOUCH CONTROL PAD
2.1
Presentation of the touch control pad
The control pad features a large LCD screen with 2 lines of text and 4 figures.
The screen displays 4 values by default :
•
current water temperature in the spa ;
•
set point (desired temperature) ;
•
day of the week ;
•
time.
The current spa water temperature is written large, while the day, time and set point are displayed in
smaller text beneath this value. This configuration may be altered.
While the controller is carrying out a specific task (priming, auto mode, etc.), this is indicated in the text
lines.
MENU
36.75
Mon
T°C Target
37.00
12:00
PM
Ozone LED
Stand-by LED
Heating LED
UW light intensity
setting
Variable speed
blower
Massage pump(s)
(depends on model)
DOWN
Auto LED
UW light effect settting
Two speed pump operating
mode
Two-speed pump speed
setting
UP
28/48
2020/10 - Indice de révision : D - Code : 38050
SPAS
SPAS
