Nota bene 2 :
The stand-by cycle will not be activated if a key on the touch pad has been touched within the last 25
minutes or if the two-speed pump was activated within the last 90 minutes. When the stand-by period
starts, the ZZ LED turns green. If a stand-by cycle is interrupted or does not start because a touch pad
key was pressed, the ZZ LED turns orange.
Upon accessing the stand-by cycle function, the following screen is displayed:
5. STAND-BY CYCLE
(▼) ESC (▲)
- - - -
Press the UP arrow to set the first stand-by cycle, the following screen is displayed:
1. START
DAY : [MTWTFSS]
10:35
Press MENU to modify the stand-by cycle setting.
The days settings starts to blink indicating that it may be modified.
Similarly to the alarms, each stand-by cycle may be activated on one or more days of the week, 16 day
combinations are proposed (see page 18).
Use the UP/DOWN arrow keys to scroll through the possible combinations, once the desired combination
is displayed on screen, save it by pressing the MENU key: the stand-by cycle start hour begins to blink
indicating that it may be confirmed or modified.
Use the arrow keys to select the hour, validate by pressing MENU, next select the minutes, press MENU
to validate: next the cycle stop time may be programmed (hours and minutes) in the same way.
The stand-by cycle duration is displayed at the bottom of the screen, in hours and decimal fractions of
hours.
1. STAND-BY STOP
08.0 HRS STAND-BY
10:35
Logic would dictate that the stop time should be after the start time. If this logic is inverted, the cycle will
stop on the day after it started:
Example 1:
•
Stand-by cycle active Monday ;
•
Start time: 9h30 ;
•
Stop time: 16h30.
The spa will enter stand-by mode every Monday at 9h30 until 16h30
Example 2 :
•
Stand-by cycle active Monday ;
41/48
2020/10 - Indice de révision : D - Code : 38050
SPAS
