26
• Select
Clear Trail
to clear the current trail points
(
Fig. 35
)
.
• Select
Save Trail
to save the current trail log to
the system’s internal flash memory. Up to 8 trail
logs can be saved.
• Select
Trail Distance
to calculate the distance
from the start point to the end point.
• Select
Trail Area
to calculate the trail area from
the start point to the end point.
• Select
Delete
to delete the selected trail log.
• Select
Show ON
to display the trail log.
6. Under the Type tab (
Fig. 36
)
, follow the steps
below to select the tracking method using distance
or time intervals:
• Highlight the Dist Interval field and press
OK
to view the options. Use the navigation keys to
select the distance interval and press
OK
to save
your settings. Select the ----- option if you do not
wish to specify the distance interval.
• Highlight the Time Interval field and press OK
view the options. Use the navigation key to
select the time interval and press
OK
to save
your settings. Select the ----- option if you do not
wish to specify the time interval.
7. Use the down navigation key to highlight the
√
option and press
OK
to save changes.
NOTE:
• If you select a value for both the distance interval
and time interval, a trail point is recorded when either
of the interval value is reached.
• To ensure the integrity of data structure, the trail
log cannot be saved into non-volatile memory when
battery is low.
• When saving trail logs, select the
Continue
option
Creating a Trail Log (
cont.
)
Fig. 36
Fig. 35
