BURNiT Pell Easy 20, Инструкция по установке и эксплуатации

Страница: 13 / 48

13
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
i
Data in the tables are for indicative
purposes.
Draught depends on the diameter,
height, uneven sections along the
chimney surface and differences
in temperature of combustion
products and outside air. We
recommend that you use chimney
fitted with flue terminal. Heating
specialist must calculate the
precise sizing of the chimney .
7.2. Connecting the boiler to the mains
power supply

Such connection must be
performed by a technician /
service shop authorized for such
operations.

Caution! ELECTRIC SHOCK
HAZARD!
- Before opening the unit: switch
off the voltage and secure the
unit against accidental restart.
- Observe installation instructions.
It is mandatory to assure a
backup power generator of
corresponding rated power! (see
table 1)
Improper cable connections may
damage the regulator!
The device may be damaged if
struck by a lightning. Make sure
it is unplugged during the storms.
To bring into exploitation the boiler and
auger must be connected to the electricity
network 220V/50Hz with power cord.
Create tight connection with the electrical
mains which complies with the local
regulations.
1. Door open switch
5. External Thermostat
6. Water temp. sensor
10. Accumulator temp. sensor
12. Flue Gas temp.
14.Igniter
15.Fan as primary combusti on
Fan
19.Pellets Feeder
21. Safety temp. STB (water)
22. Safety temp. STB (pellets)
26.Water Pump