2/93
1. Verpackungsinhalt:
- elektronisches Dartboard
- Stromadapter
- Bedienungsanleitung
- 6 Darts
- Ersatzspitzen (Soft Tips)
2.Montageanleitung
Wählen Sie einen Standort, wo Sie
das Dartboard aufhängen möchten,
wo mindestens 3m freie Fläche vor
dem Board vorhanden ist. Die
Abwurflinie befindet sich 2,37m von
der Vorderseite des Dartboards
entfernt. Dieses Dartboard wird
entweder mit dem mitgelieferten
Stromadapter oder mit 3 „AA“
Batterien (gehören nicht zum
Lieferumfang) betrieben. Bei der
Verwendung von Batterien sind Sie
nicht gezwungen, das Gerät in der
Nähe einer Stromquelle zu montieren
und können das Dartboard überall da
aufhängen, wo Sie über genügend
Platz verfügen.
Suchen Sie Sich eine Wand aus und
machen Sie eine Markierung bei
1,54m. Eine weitere Markierung
machen Sie über der ersten
Markierung in einer Höhe von 1,92m.
Das Bullseye des Dartboards muss
1,73m vom Boden entfernt sein.
Montieren Sie das Dartboard, indem Sie die Vorrichtungen an den Schrauben aufhängen, die Sie zuvor an den
markierten Stellen an der Wand angebracht haben. Achten Sie stets darauf, dass beide Schrauben genau
übereinander justiert sind, nur so ist gewährleistet, dass das Dartboard gerade hängt. Fügen Sie nun die Batterien
in das dafür vorgesehene Fach auf der Rückseite des Dartboards. Justieren Sie die Schrauben an der Wand so,
dass das Dartboard bündig mit der Wand abschließt. Wenn Sie das Dartboard noch sicherer an der Wand
befestigen möchten, dann montieren Sie vier zusätzliche Schrauben in den Löchern, die sich im Zahlenkranz
rechts und links neben den zählbaren Segmenten befinden.