9
Insert the new drive into all empty slots, slide the drive in with the locking mechanism open, and swing the
lock back down until it clicks into the place.
10
Close the front cover with the key.
11
Turn the TeraStation off, then turn it on while holding down the mode button.
12
“RAID-x NORMAL” will be displayed on the LCD panel.
RAID-x
NORMAL
If either “RAID-x ONE DRIVE DOWN”, “RAID-x TWO DRIVE DOWN”, or “SYSTEM DOWN” messages are displayed,
try the procedure described in each section above.
13
Create a volume by referring to the “Creating a Volume” section in chapter 3.
For RAID 5 Volume:
1
Open the front cover with the included key.
2
Check the status LEDs. The LED for the failed drive glows amber.
3
Pull out one drive cartridge whose status LED glow amber and remove them from the TeraStation. Leave the
drives whose status LEDs blink amber in the TeraStation.
Do not unplug and remove the drives with the status LED lit green. If you do, it may cause data loss or
the TeraStation to malfunction.
4
Turn off the TeraStation. It may take some time until the shutdown process completes.
5
Turn on the TeraStation while holding down the mode button with the drives left removed.
6
When the “RAID-5 ONE DRIVE DOWN” message is displayed, replace the defective drive by referring to the
““ONE DRIVE DOWN” Is Displayed on the LCD Panel” section above.
If “SYSTEM DOWN” is still displayed, go to the next step to replace the defective drive.
7
Remove another defective drive cartridge whose status LED glows amber from the TeraStation.
8
Remove drives from the cartridges and install new drives in them.
9
Insert the new drive into all empty slots, slide the drive in with the locking mechanism open, and swing the
lock back down until it clicks into the place.
10
Close the front cover with the key.
11
Turn the TeraStation off, then turn it on while holding down the mode button.
12
“RAID-5 NORMAL” will be displayed on the LCD panel.
RAID-5
NORMAL
If “RAID-5 ONE DRIVE DOWN” or “SYSTEM DOWN” is displayed, try the procedure described in the each section
above.
89
Содержание TeraStation WSS WSH5010N6
